Glacier bay N2428R-DF Manual De Instrucciones página 6

ASSEMBLY INSTRUCTIONS
7. Connect the Water Supply Line, (Fig. 7)
• Connect the water supply line (not included)
between the tank (A) and shut-off valve.
• Tighten the tank connection coupling nut ¼ turn
beyond hand tight. (DO NOT OVERTIGHTEN
THE TANK CONNECTION.)
• Turn on supply valve and allow tank (A) to fill.
• Check for leakage at all connections and tighten
or correct as needed.
8. Install Seat with Lid (C), (Fig. 8)
• First, turn the toilet seat with lid upside-down.
• Second, insert the lock-bolt (OO) in the bolt
trough, then adjust the lock-bolt (OO) to make the
hole distance match with the toilet.
• Then turn the toilet seat with lid over, so
lock-bolts (OO) protrude downward. Insert
lock-bolts (OO) into the toilet holes and adjust the
toilet seat and lid to find the best assembly
position.
• Finally, place the washer (PP) and then the
lock-nut (QQ) onto the lock-bolt (OO) from
underneath the toilet bowl (B) and tighten the
lock-nut (QQ) firmly.
Bolt Trough
B
6
Fig. 7
Fig. 8
Adjustable Hinge
C
OO
PP
QQ