Moser Cerastyle Pro 4417 Instrucciones De Operación página 10

ENGLISH
General user information
de
Information about using the operating manual
f Before using the appliance for the first time, you must read
en
and understand the operating manual completely.
f Consider the operating manual as part of the product and
fr
store it in a safe and accessible place.
f This operating manual is also available in PDF format from
it
our service centres. The EC declaration of conformity can also
be requested in other official EU languages from our service
centres.
es
f Include this operating manual if passing the appliance on to
a third party.
pt
Explanation of symbols and notes
nl
The following symbols and signal words are used in this operating
manual, on the appliance or on the packaging.
da
PROHIBITED
sv
This symbol prohibits the use of the appliance near
bathtubs, showers, washbasins and other water-filled
containers.
no
DANGER
fi
Danger of electric shock which may result in serious
physical injury or death.
tr
DANGER
Danger of explosion which may result in serious physical
pl
injury or death.
cs
WARNING
Warning of possible physical injury or a health risk.
sk
CAUTION
Information about danger of material damage.
hr
Note with useful information and tips.
hu
Action to be taken by owner.
f
sl
Carry out these actions in the sequence described.
1.
ro
2.
3.
bg
ru
uk
et
lv
lt
el
ar
10
Product description
Description of parts (Fig. 1)
A Heating plates, springloaded
B Handle
C Mains cable with anti-twist protection
D Temperature controller
E LED display
F On/off switch
Technical data
Operating voltage: 220 – 240 V AC / 50/60 Hz
Power consumption: 46 W
Dimensions (LxWxH): 260 x 29 x 36 mm
Weight: 210 g without mains cable
Operating conditions
Ambient temperature: 0°C – +40°C
The hair straightener is safety insulated and radio screened. It
meets the requirements of EU Electromagnetic Compatibility Direc-
tive 2014/30/EU and Low Voltage Directive 2014/35/EU.
Operation
Preparation
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power supply.
f Only operate the hair straightener with the voltage
stated on the nameplate.
Operation
1. Connect to the mains power supply.
2. Switch on the hair straightener using the on/off switch (F)
(Fig. 2ⓐ). The LED display (E) is red.
3. Select the desired temperature (150°C – 230°C).
· To increase the temperature, move the temperature
controller (D) in a clockwise direction (Fig. 3ⓐ).
· To reduce the temperature, move the temperature
controller (D) in an anticlockwise direction (Fig. 3ⓑ).
4. Once the operating temperature has been reached, the LED
display (E) flashes.
5. After using the hair straightener, switch it off using the on/off
switch (Fig. 2ⓑ). The LED display goes out.
6. Disconnect from the mains.
7. Allow the hair straightener to cool down.
Automatic switch-off
The hair straightener switches off automatically after 50 minutes.