Osram DALI Pro 2 IoT Manual De Instrucciones

DALI Pro 2 IoT
EN 62368-1
t = 0...+40°C
EN 60529
a
EN 55024 Class A
EN 55032 Class A OSRAM GmbH
EN 301 489-1 V2.1.1
Berliner Allee 65
EN 301 489-17 V3.1.1 86153 Augsburg
C15071820
IEC 62386-101
G15081829
IEC 62386-103 www.osram.com
13.07.20
1x
1x
The USB Wi-Fi dongle is included, to be inserted by the user. The micro-
USB connector is used for service (Attention: for manufacturer use only).
The controller provides status information by colored LED indicators and
allows user settings by means of user buttons.
100Mb/s
Germany
1
3
The DALI Pro 2 IoT controller
is to be mounted on a 35 mm DIN rail
inside a switch cabinet as per DIN 43880
6)
requiring a width of 6 horizontal pitch units.
Wiring diagram shows only DALI line A, DALI line B is not used.
DALI Pro 2 IoT to be mounted in electrical cabinet by authorized staff.
Do not apply high voltage to the DALI lines, controller may be damaged.
1)
2
4
"click"
2)
Toggles through
on-off-dim functions
3)
for selected channel(s)
1
2
4) 5)
Restart Reset