Cleaning Pre-Filter; About The Pre-Filter - Boneco W210 Manual Rápido

CLE ANING PRE-FILTER

ABOUT THE PRE-FILTER

The pre-filter cleans the air from coarse contaminants.
Clean the pre-filter if it is dusty or dirty.

CLEANING PRE-FILTER

1. Press down each of the four corners of the cover in
sequence to unlock it.
2. Remove the pre-filter by pulling it upwards by the lug
in its center.
3. Wash the pre-filter under running water using a
cleaning brush.
4. Dry the pre-filter with a cloth.
5. Insert the pre-filter into the appliance.
6. Reattach the cover.
27
en