Getting Started - Marshall 1960 LEAD Manual De Instrucciones

GETTING STARTED

Congratulations on purchasing your Marshall cabinet. Our cabinets are
designed with you in mind, with each speaker specially selected for its tone and
each unit lovingly crafted. We've got over 50 years' worth of experience and this
allows us to deliver meticulously planned, high quality products. From major
international festivals and multi-million pound recording studios to local bars
and bedroom band practice, our cabinets are built to stand the test of time and
fulfil all your performance needs.
4x12" mono/stereo switching facilities
To ensure maximum flexibility, some of our 4x12" cabinets boast a mono/
stereo switching system on the back. When 'stereo' mode is selected, the
cabinet is split into two 8Ω 'halves' for use with a stereo amp. When 'mono'
is selected you are offered two different impedance inputs (4Ω or 16Ω)
to choose from. Always ensure you select the correct one to match the
impedance of your amplifier and never use both inputs at the same time when
the cabinet is in 'mono' mode.
2
1) Mono/stereo selection switch. Selects either stereo or mono mode.
2) Right input. When switch (1) is set to:
i) Stereo, this provides connection to the right* side pair of speakers. Rated
at 8Ω.
ii) Mono, this provides connection to all four speakers. Rated at 4Ω.
3) Left input. When switch (1) is set to:
i) Stereo, this provides connection to the left* side pair of speakers. Rated
at 8Ω.
ii) Mono, this provides connection to all four speakers. Rated at 16Ω.
*Right and left refer to the two stereo sides of the cabinet as seen when facing
the front of the cab.
2x12" stereo selection facilities
Some of our 2x12" cabinets are fitted with a mono/stereo selection plate on the
back. This enables you to split the cabinet into two halves for use with a stereo
set-up if you desire.
Mono usage: Use the input marked mono (1), the impedance of which is clearly
indicated above the jack.
Stereo usage: Use both inputs (1 and 2). Once again the impedance of each is
clearly marked.
2
Single mono input
Some cabinets are fitted with a single mono input socket. With this cabinet the
impedance and power rating are fixed.
Use a suitable speaker cable to plug your guitar amplifier into this socket.
Ensure the impedance and power handling of the cabinet is compatible with
your chosen amplifier.
300W RMS
1
3
150W / CH. STEREO
1
ENGLISH
WARNING! IMPORTANT SAFETY
INSTRUCTIONS
Please read the instruction manual for this speaker cabinet and any other
equipment to be used with this speaker cabinet carefully before use.
1. Read these instructions.
2. Follow all instructions and heed all warnings.
3. Do not attempt to remove or re-wire the internal speakers or any other
components within the speaker cabinet.
4. Never use a speaker cabinet or associated equipment in damp or
wet conditions. No objects filled with liquids should be placed on the
apparatus.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
10. Ensure any associated equipment is switched off and unplugged from the
mains in the event of lightning storms or if unused for long periods of time.
11. Only use attachments/accessories specified by the manufacturer.
12. Always ensure all associated equipment is switched off and unplugged from
the mains before connecting or disconnecting the speaker cabinet.
13. Always ensure that the supplied speaker lead is used to connect the
speaker cabinet to associated equipment. Always plug the speaker lead
into the speaker cabinet before plugging it into the amplifier.
14. Protect the speaker lead from being walked on, pinched or having heavy
objects rolled over it. Ensure the speaker lead is not entangled with any
other lead. If a replacement speaker lead is required, please contact your
authorised Marshall Dealer.
15. If the speaker cabinet has switchable impedance, please ensure that
the correct impedance is selected and that any associated equipment
impedance settings are also correctly set.
16. If the speaker cabinet has mono/stereo switching capability, ensure that
the switch is in the correct position for the desired operation.
17. Always move or transport speaker cabinets individually. Never attempt
to move or transport speaker cabinets if they have other cabinets or
associated equipment stacked on or under them.
18. Always ensure that the speaker cabinet is on a level surface, whether
used or stored individually, or as a speaker cabinet stack, and/or with
associated equipment placed underneath or on top.
19. Marshall speaker cabinets should only be stacked with compatible
Marshall speaker cabinets. Never attempt to stack another
manufacturers speaker cabinet with a Marshall speaker cabinet. If you
are unsure, contact your authorised Marshall Dealer.
20. Refer all servicing to qualified personnel. Servicing is required when the
speaker cabinet has been damaged in any way, such as liquid being spilled
or objects falling into it, the speaker cabinet being exposed to rain or
moisture, the speaker cabinet not operating normally or being dropped or
damaged in any way
KEEP THESE INSTRUCTIONS.