Marshall MG10 Guia De Inicio Rapido

MG10
QUICK START GUIDE
DOWNLOAD THE FULL MANUAL AT
Informazioni disponibili in Lingua italiana. Visita marshall.com per scaricare il manuale completo in Italiano.
Product dimensions (height x width x depth):
MG10 310mm × 290mm × 170mm
WARNING! SAFETY INSTRUCTIONS
PLEASE READ THIS MANUAL CAREFULLY BEFORE PLUGGING IN.
FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.
Warning: Please refer to full
details in separate Important
Safety Instructions CATS-90009.
Warning: Before going any
further, make sure that your amp
is compatible with your mains
electricity supply. If you have any
doubt, please seek help from a
qualified technician – your Marshall
dealer can help you with this.
MAINS INPUT & FUSE
The specific mains input voltage
rating that your amp has been
manufactured for is indicated on
the rear panel of the amp.
Whilst the information contained herein is correct at the time of publication, due to its policy of constant improvement and development,
Marshall Amplification Plc, Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England. T: +44 (0) 1908 375411. Registered in England. Registered Number: 805676.
Unit weight 4.8kg
Never attempt to bypass the fuse
or fit one of the incorrect value
or type.
IMPORTANT SET UP INFORMATION
1. Ensure that the power switch is
set to the off position.
2. Connect the supplied mains
(power) lead into an electricity
outlet.
3. Ensure that any master volume
and/or output level controls on
the front panel are set to zero.
4. Plug your guitar into the input
jack socket on the front panel.
5. Turn the front panel power
switch on.
Marshall Amplification Plc reserves the right to alter specifications without prior notice.
6. Turn the volume up to your
preferred level and you're
ready to play.
TRANSPORTING YOUR EQUIPMENT
Please ensure that your amp is
switched off, unplugged from
the mains electricity supply and
all removable cables have been
disconnected from your equipment
before attempting to move it.
ENGLISH
M3311.417
CATS-90023-02