Publicidad
Idiomas disponibles
Idiomas disponibles
Height Adjustment for Headrest and Shoulder Harnesses
1. Please adjust the headrest and check if the shoulder harnesses are at the
correct height according to (Fig. 20 and Fig. 22).
2. Pull the headrest adjuster (Fig. 28.1) up, meanwhile pull up or push down the
headrest. The headrest positions are shown as (Fig. 28).
Detach Soft upholstery
1. Press the red button to disengage the buckle (Fig. 16).
2. Remove the small inner pads and crotch strap.
3. Detach the elastic band (Fig. 29) on the headrest, and then remove the cover.
4. Detach the snaps on the seat pad, pull the buckle to the back of seat pad, and
then remove the seat pad (Fig. 30).
5. To assemble soft upholstery in reverse steps.
Care and Maintenance
• Please wash the seat cover and inner padding with cold water under 30°C.
• Do not iron the soft goods.
• Do not bleach or dry clean the soft goods.
• Do not use undiluted neutral detergent, gasoline or other organic solvent to
wash the child restraint or base. It may cause damage to the child restraint.
• Do not twist the seat cover and inner padding to dry with great force. It may
leave the seat cover and inner padding with wrinkles.
• Please hang dry the seat cover and inner padding in the shade.
• Please remove the child restraint and base from the vehicle seat if not in use for
a long period of time.
• Put the child restraint in a cool, dry place and somewhere your child cannot
access it.
Vehicle Fitting Information
This child restraint with base is classified for „Semi-Universal" or ISOFIX child restraint
system use.
It is suitable for fixing into the seat positions of most cars.
Seat positions in other cars may also be suitable to accept the child restraint.
The following Vehicle Fitting Information is only for vehicles sold in European
markets.
If in doubt, consult either the child restraint manufacturer or the distributor.
ALWAYS give priority to the rear seats of your vehicle.
26
Publicidad
