Memory Channels; Memory Channel List - Kenwood TH-D74A Manual Del Usuario

Ocultar thumbs Ver también para TH-D74A:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MEMORY CHANNELS

MEMORY CHANNEL LIST

The memory channel confi gurations can be displayed on the
Memory Channel List screen. In the Memory Channel List
screen, you can select a channel to store or to recall. You can
assign a name to a Memory Channel.
1 Press [MR] to switch to the memory mode.
2 Press [ENT].
Memory channel list appears. You can also access to the
memory channel list by Menu No. 200.
Display
[0] to [999]
[L 0], [U 0] to [L49], [U49]
[Pri]
[A 1] to [A10]
[C]
3 Select the channel.
You can select the channel by inputting the channel
number from 0 to 999 by 12 keypad. When you select 1
or 2 digits channel, you can also select by inputting the
channel number and pressing [ENT].
4 Press [ENT].
The selected channel is set and return to the frequency
display.
Storing Simplex And Standard Repeater Frequencies
1 Select the frequency, mode, etc.
2 Press [F], [MR].
The screen for selecting the channel to store appears.
3 Select the memory channel number.
4 Press [ENT].
The simplex channel is registered.
Storing Odd-Split Repeater Frequencies
When you change the RX and TX frequencies, register the
RX frequency fi rst and then register the TX frequency. Only
the TX frequency cannot be registered.
1 Register the RX frequency.
A split channel can be registered only to an already
registered memory channel.
2 Display the TX frequency.
3 Press [F], [MR].
The screen for selecting the channel to store appears.
Type
Memory channels
Program scan memory
Priority scan memory
Weather channels
(TH-D74A only)
CALL channels
4 Select the memory channel number using [
[ENC] control.
5 Press [A/B].
The split channel is registered.
Note:
◆ You cannot set the TX and RX frequencies on different frequency
bands.
◆ You cannot set the different frequency step size for the TX and RX
frequencies.
Clearing A Memory Channel
You can clear the specifi ed channel of the registered memory
channels.
1 Press [MR] to enter the memory mode.
2 Press [ENT].
The memory channel list appears. You can also access to
the memory channel list by Menu No. 200.
3 Select the specifi ed channel and press [MENU].
The memory channel list menu appears.
4 Select [Clear Memory] and press [A/B].
Clear memory channel screen appears. Press [MODE] to
return to the memory channel list menu.
5 Press [A/B].
The specifi ed memory channel is cleared.
To clear another memory channel, repeat the procedure
from step 3.
Memory Recall Method
This menu provides you with the option to recall memory
channels with stored frequencies in your current frequency
band, or all memory channels:
1 Access Menu No. 202.
[All Bands]:
This allows you to recall all programmed memory
channels.
[Current Band]:
This allows you to recall only those memory channels that
have stored frequencies within the current frequency band.
]/[ ] or
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Th-d74e

Tabla de contenido