Microsd Memory Card; Inserting/ Removing A Microsd Memory Card; Formatting A Microsd Memory Card - Kenwood TH-D74A Manual Del Usuario

microSD MEMORY CARD

SUPPORTED microSD MEMORY CARD
Note:
◆ A microSD memory card or microSDHC memory card is not
supplied with this transceiver. Purchase a commercially available
product.
◆ A microSDXC memory card can not be used with this transceiver.
The following table shows the microSD
microSDHC for which JVCKENWOOD has
memory card
verified operation.
In this manual, microSD
memory cards
cards are referred to as microSD
memory
Memory Card
microSD
microSDHC
• Regardless of the above table, JVCKENWOOD does not
guarantee the operation of all microSD
• The operation of a microSD
other than the transceiver is not guaranteed.
• The larger the capacity of the microSD
the longer it takes to recognize the microSD
• Please note that the data in the microSD
be damaged or erased in cases such as the following.
• If the microSD
memory card
performing the [Safely Remove] operation (unmount).
• If the battery pack or battery case is removed during
operation.
• If the battery pack or alkaline batteries run out of power
during operation.
• If the power from an external power supply suddenly
stops without installing the battery pack.
INSERTING/ REMOVING A microSD MEMORY
CARD
Inserting (Mounting) a microSD Memory Card
1 Switch OFF the power of the transceiver.
2 Open the cap of the microSD memory card slot on the
side.
3 Insert the microSD memory card.
• With the contacts of the microSD memory card
atthe front, insert the microSD memory card into the
[microSD memory card slot] until you hear it lock
into place with a click. The transceiver automatically
recognizes the microSD memory card and <
flashes on the display. It changes to always displayed if
the card enters the readable/writable state correctly.
Note:
◆ When inserting a microSD memory card, do not touch its
contacts.
◆ Do not remove a microSD memory card while data is being
written or read. Doing so may cause the data on the microSD
memory card to be damaged or erased.
and
memory card
and microSDHC
cards.
memory
Size
2 GB
4 GB
8 GB
16 GB
32 GB
s.
memory card
formatted with
memory card
used,
memory card
.
memory card
may
memory card
is removed without
>
4 Close the cap.
Close the cap of the microSD memory card slot on the
side properly.
Note:
◆ Do not insert a microSD memory card the opposite way around or
use force to insert it. Doing so may damage the microSD memory
card or slot.
Removing (Unmounting) a microSD Memory Card
When removing a microSD memory card, be sure to perform
the operation to safely remove (unmount) it.
Note:
◆ Removing a microSD memory card without unmounting it
correctly may damage it.
1 Access Menu No. 820.
The microSD memory card is unmounted. When
unmounting is completed, the completed confirmation
screen appears.
2 Press [A/B].
Unmounting completes and the frequency screen
reappears.
3 Remove the microSD memory card.
• When removing a microSD memory card, push until
you hear it unlock with a click and remove it.

FORMATTING A microSD MEMORY CARD

When using a new microSD memory card, format the
microSD memory card as described below. All the data in
the microSD memory card will be erased when the microSD
memory card is formatted.
1 Insert the microSD memory card into the transceiver.
2 Switch ON the power of the transceiver.
3 Access Menu No. 830.
The format confirmation screen appears.
4 Press [A/B].
Formatting begins. When formatting is completed, the
completed confirmation screen appears.
5 Press [A/B] again.
Formatting completes and the frequency screen
reappears.
microSD
Memory Card Slot
Cap
microSD
Memory Card
(insert the metal
contact side)
41