Mopar XBM Manual Del Usuario página 10

10
10. Push the tilt lever (3) downward to the released posi­
tion.
11. Remove the two screws (1) attaching the upper
shroud to the lower shroud.
screws, un­clip the upper and lower shrouds from
one another by applying hand pressure along the
seams where the shrouds connect on the sides.
12. Remove the upper shroud.
13. Remove the remaining screw (2) attaching the lower
shroud (4) to the column.
14. Remove the lower shroud.
15. Push the tilt lever (3) upward, locking the column in
place.
16. Remove the gearshift cable from the shifter (1, 2)..
Jul 01, 2011
After removing the
4280416
K6861201