Axis P12 Serie Guia De Instalacion página 21

Angled Surface Installation
1. Fasten the angled mounting bracket to the wall or ceiling, using screws and plugs
appropriate for the wall/ceiling material. Ensure that the bracket is pointing towards
the area to be monitored.
2. Assemble the plate with the screw and align it so the arrows are vertical or horizontal.
3. Fasten the camera to the plate with the two screws.
4. Snap on the cover.
5. Proceed to Connect the cables, see Connect the Cables on page 26 .
AXIS P12 Network Camera Series
21
EN