Honeywell Home TL8100A1008 Instrucciones De Instalación

TL8100A1008
7 DAY PROGRAMMABLE HYDRONIC THERMOSTAT
DESCRIPTION
This thermostat can be used to control the following
heating systems:
Temperature
preset buttons
Programming
buttons
Temperature
adjustment
buttons
TEMPERATURE DISPLAY
AND SETTING
Setpoint Temperature
The thermostat
normally displays the
measured ambient
temperature. To view
the setpoint
temperature, briefly
press either of the
buttons. The setpoint
temperature will appear
for 5 seconds.
To adjust the setpoint, press one of the
until the desired temperature is displayed.
Appears during the
setpoint display
buttons
INSTALLATION INSTRUCTIONS
• gas, oil or electric systems
• hot water heating
• hot air system with no fan control
• millivolt system (e.g., gas fireplace)
• electric heating up to 1200 W @ 240 V max.
Time and day
Temperature
Mode and preset
temperature
indicators
Low-battery
indicator
Heating
indicator
Preset Temperatures
The thermostat has 3 preset temperatures:
Preset temperature
Comfort temperature
Economy temperature
Vacation temperature
To use a preset temperature:
Press the corresponding button (
temperature and the corresponding icon will be
displayed.
To change a preset temperature:
1. Set the desired temperature using the
tons.
2. Press and hold the corresponding button (
or ) until the icon is displayed on the screen
(approximately 3 seconds).
Default value
68°F (20°C)
64°F (18°C)
50°F (10°C)
, or ). The
but-
,
69-2018EFS-07