Programming Track Numbers - Philips AZ 1007 Manual De Instrucciones

Different play modes: SHUFFLE/REPEAT
The CD MODE button allows you to select 4 different play modes
which can also be combined with a CD program. The modes can
be selected or changed during playback and will flash for two
seconds before playing your selected mode.
1. During playback, select your play mode by pressing
CD MODE once or more until the desired play mode appears
in the display.
SHUFFLE - All tracks or program are played in random order.
REPEAT ALL SHUFFLE - Repeats the entire CD or program in
random order.
REPEAT - Plays the current track continuously.
REPEAT ALL - repeats the entire CD or program
™ You can use SEARCH ∞ or § to skip tracks during CD
MODE playback.
2. To return to normal playback press CD MODE until the various
SHUFFLE/ REPEAT modes are no longer shown in the display.
™ You can also press STOP 9 to quit the play mode.

PROGRAMMING TRACK NUMBERS

You may store up to 20 tracks in the desired sequence. If you
like, store any track more than once.
1. In the STOP position, press SEARCH ∞ or § for your
desired track.
2. As soon as your chosen track number is displayed, press
CD MODE once to store the track.
™ The display will show 'P' briefly and '
by your selected track number.
3. Select and store all desired tracks in this way.
To review your set program
• In the stop position, press and hold down CD MODE for more
than two seconds.
™ The display will show in sequence all your stored track
numbers.
• Start playback of your program by pressing
PLAY•PAUSE 2;.
Erasing a program
You can erase the contents of the memory by:
– lifting the CD door open;
– moving the source selector position;
– pressing STOP 9 twice during playback / in stop position.
™ The display will show 'no' briefly and
disappear when the program is cancelled.
', followed
PROGRAM
, which
PROGRAM
CD PLAYER
SHUFFLE
REPEAT
ALL
PROGRAM
PROGRAM
PROGRAM
PROGRAM
11