Add An Upright Post For The Gate - Petsafe 2-in-1 Dog Kennel Instrucciones De Montaje

__________________________________________________________________________________________________

Add an Upright Post for the Gate

Step
3
5
1. Gather 1 upright, 2 clamps , and 1 - / " x 2" carriage bolt with nut.
16
2. Install the gate post 22 ¼" to either side of the corner upright.
Important: Do NOT have the gate span a joint in the frame. The frame can come apart at the
swedged joint.
1
22 / "
4
1
Note: Gate Opening is 22 / " between posts. All swedged joints will be loose until fence fabric is installed.
4
www.petsafe.net 5