Replace The Filter And Wick; Understanding The Healthy Air Protect Lock; Replacing The Nanoprotect Filter - Philips AC3829 Manual Del Usuario

Note
• Please use mid or acid cleanser
• White vinegar (5% acetic acid)
mix with equal amount of water
• 4g citric acid with 4L water
• If there are white deposits
(limescale) on the filter, make
sure that the side with the white
deposits is immersed in the water.
• Do not take the NanoCloud rotary
humidification wick off the wheel
during descaling.
5
Rinse the NanoCloud rotary
humidificationwick under the tap
to rinse away vinegar or citric acid
residues. During rinsing, turn the
wick so that both front and back are
rinsed (fig.‰).
6
Air dry the NanoCloud rotary
humidification wick (fig Š).
Note
• Do not put the NanoCloud rotary
humidification wick under direct
sunlight.
7
Touch and hold
to reset the NanoCloud rotary
humidification wick cleaning time.
for 3 seconds
6 Replace the
filter and wick
Understanding the
healthy air protect lock
This appliance is equipped with the
healthy air protect lock to make sure
that the Nano protect filter and the
humidification wick are in optimal
condition when the appliance is
operating. When the Nano protect filter
and the humidification wick are almost
expired, the replacement light
flashes and the filter code displays on
the screen (see Filter alert chart).
If you do not replace the filter and
wick in time, the appliance will stop
operating and get locked.
Replacing the
NanoProtect filter
Note
• The air purification filters are not
washable nor vacuum cleanable.
• Always turn off the air purifier and
unplug from the electrical outlet
before replacing the filters.
EN
15