Filling The Water Tank; Using The Steam Cleaner - EASYHOME MD 16941 Manual Del Usuario

Using the steam cleaner

Filling the water tank

NOTICE!
Risk of damage.
The appliance may be damaged by additives in the water.
− Do not add cleaning agents to the water tank.
− Use distilled water if possible in order to prevent the build-
up of limescale.
Make sure that the appliance is switched off and unplugged.
− Pull on the cap fi tting on the water tank
the water tank with approx. 16–17 oz (470–500 ml) of tap water or distilled water, using
the measuring cup supplied with the appliance. Do not overfi ll the water tank.
You can also take the water tank off the product in order to fi ll it (see Fig. E).
− Fit the cap back on the water tank opening.
Using the steam cleaner
The steam cleaner is designed to release and remove stubborn dirt from smooth, heat-
resistant surfaces in the household without the use of chemical solvents. The steam
cleaner can also be used to freshen up curtains, clothing and upholstery.
− Prepare the steam cleaner and accessories for use, as instructed above.
CAUTION!
Risk of injury/damage.
There is a risk of scalding and a risk of damage to surrounding
objects from the steam.
− Never leave the steam cleaner unattended during
operation.
− Allow the appliance to cool down before changing the
cleaning cloth.
− Do not hold the cleaner foot at an angle as hot water may
run out.
14
11
in order to open the water tank
10
. Fill