D-Link DCS-2802KT Manual De Usuario página 22

Section 3 - mydlink
1 Device Photo
2 Device Name
3 Device Location
4 Designated Contact
5 Motion Setting
6 Night Vision
7 Anti-Flicker
8 Enable Camera LED
9 Privacy Mode
10 Invert Image
11 Upgrade Time
Current Firmware
12
Version
13 Device ID
14 Remove Device
D-Link DCS-2802KT User Manual
Tap to add a customized photo of this device.
Tap to change the device's name.
Tap to change or add a new location for this device.
Tap here to add, remove, or edit designated contacts that appear in
the rich notification.
Tap to further configure sensitivity and active area of motion
detection for the camera.
Tap to change night vision detection to On, Off or Auto.
Tap to enable Anti-flicker. This mode allows you to control what
frequency to stream video at to match your display.
Disabling this will turn off the LED until you turn it back on.
Tap to enable Privacy Mode. Privacy mode will disable the camera
feed.
Enable this to invert the camera view.
Shows time of auto firmware upgrade. Tap to enter the firmware
upgrade settings. You can choose the most suitable time for
automatic updates.
This displays the installed version of the firmware on your device.
Displays the MAC address.
Tap this button to disconnect this device from your mydlink account.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
19