Mounting The Camera; Snap Mount - D-Link DCS-2802KT Manual De Usuario

Section 2 - Installation
1
Identify and mark the location where you want to install the bracket,
/
assuring that it is at least 20 cm from the ceiling.
2
Using a 6 mm drill bit, drill a 25 mm deep hole over the mark. For a
/
plaster, drywall, or concrete wall, insert the plastic anchor to support
the screw first.
3
Twist the supplied screw into the wall or anchor, making sure to
/
leave enough clearance between the screw head and the wall.
D-Link DCS-2802KT User Manual

Mounting the Camera

Snap Mount

1
2
3
9