Tabla de contenido
Publicidad
Section 2 - Installation
1
/
Identify and mark the location where you want to install the bracket, assuring that
it is at least 20 cm from the ceiling.
2
/
Using a 6 mm drill bit, drill three 25 mm deep holes over the pencil marks. For a
plaster, drywall, or concrete wall, insert the plastic anchors to support the screws
first.
3
/
Place the mount over the holes that are in the wall. Make sure to align the mount
holes with the holes in the wall. Use the supplied screws to attach the mount to
the surface of the wall.
D-Link DCS-2802KT User Manual
Wall Mount
11
Publicidad
Tabla de contenido
