Tabla de contenido
Publicidad
STEP 1
Please refer to figure 1a, mark
and drill pilot holes for the
bottom mounting.
Mount the bottom mount
brackets to the cabinet floor
using qty (10) #8 wood screws.
For heavy applications, it is
recommended to add 1/4" bolts
thru the brackets and cabinet
floor.
NOTE
24" shelf - inside cabinet width
must be between 22-1/4" to 22-
3/8" [564-568mm].
36" shelf - inside cabinet width
must be between 34" to 34-3/16"
[864-868mm].
3
#2
32
(2mm)
(6mm)
Optional tool
(only if using the
1/4" bolts)
STEP 2
Please refer to figure 1b, mark
and drill pilot holes for the side
mounting.
Mount the side frames to the
walls of the cabinet using qty (8)
#5 wood screws (Figure 2a).
NOTE
For side mounting, this is
designed for a frameless cabinet
application.
When side mounting into a Face
Frame cabinet, depending on
your cabinet construction such
as, Face Frame width, hinge
style, and location, a scab board
may be required.
3
32
(2mm)
2
Bottom Mounting
FIG.
1a
⁄ "
[20mm]
2 ⁄ "
(54mm)
6 ⁄ "
(160mm)
#5 Wood Screws
#1, 1/4" bolt
#2, 1/4" cap nut
#3, washer
1
4
Side Mounting
FIG.
1b
Customer Service: 800-626-1126 | rev-a-shelf.com
Front of Cabinet
9 ⁄ "
15 ⁄ "
(246mm)
(396mm)
For 24" unit
For 36" unit
Center line of cabinet
9 ⁄ "
15 ⁄ "
(246mm)
(396mm)
For 24" unit
For 36" unit
FIG.
2a
#5 Wood Screws
⁄ "
[20mm]
2 ⁄ "
(54mm)
6 ⁄ "
(160mm)
Publicidad
Tabla de contenido
