CONTROL PANEL
C10
C11
C
C7
DESCRIPTION OF THE CONTROL PANEL (C)
C1 ON/STAND-BY (on/off) key
C2 Mode selection key (air conditioning, dehumidifying, fan)
C3 Decrease key
C4 Increase key
C5 Ventilation speed selection key
C6 Silent button (on some models only)
C7 Timer button
C8 Stand-by indicator
C9 Silent indicator
C10 Timer indicator
C11 Air conditioning mode indicator
C12 Dehumidifying mode indicator
C13 Fan mode indicator
C11
C14 Set temperature values, programmed on / off time
C15
C15 Auto ventilation speed indicator
C8
C16 Ventilation speed indicator
C10
TURNING THE APPLIANCE ON AND OFF
Before connecting the plug to the power outlet, make sure that
C14
the drainage hose caps (A10) (A11) located on the back of the
appliance are correctly inserted.
Insert the plug into the socket.
C8
The stand-by indicator lights up.
Press the
(C1) key to turn on the appliance.
C3
When the appliance turns on it will be activated with the last
function set before it was shut off.
C2
To switch the appliance off, press the
(C1) again.
Please note: If start-up is not continued, after a few minutes
C3
the display light dims in order to reduce energy consumption.
Please note: Never turn off the air conditioner by simply pulling
C2
the plug. Press the
stand-by and wait a few minutes before pulling the plug. In this
manner, the appliance can perform the operating status checks.
C12 C13
C2
C3
C5
C6
C7
C9
C12
C13
C5
C6
C4
C7
C9
C1
C12
C13
ON/STAND-BY button
C4
C1
key in order to put your air conditioner in
C14
C4
MODES SELECTION
To select the desired operating mode, press repeatedly the MODE
key (C2) until the desired function is selected.
AIR CONDITIONING MODE
This is ideal for hot and humid weather when the room needs to
C5
be both cooled and dehumidified.
C6
To correctly set this mode:
C7
•
Press repeatedly the MODE key (C2) until the air condition-
C9
ing
the desired temperature.
C12
•
To change the temperature to be reached, press the
(C3) or
C13
•
Select the desired fan speed by pressing the
The speeds available are:
Minimum air flow: when maximum silent operation
C4
is desired.
Medium air flow: when the noise level needs to be
C1
low but with a good comfort level.
Maximum air flow: to reach the desired
temperature as soon as possible.
Auto air flow: The appliance automatically chooses
the best fan speed based on the temperature selected
and the environmental conditions.
13
C16
C5
C15
indicator (C11) appears. The display (C14) will show
(C4) key.
C9
C8
C6
C1
(C5) key.