Statement Of Use; Declaration Of Noise And Vibration Emission - Desoutter PTF020-T6700-I4Q Instrucciones De Producto

Original instructions.
© COPYRIGHT 2014, DESOUTTER HP2
7SJ UK
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.

STATEMENT OF USE

This product is designed for installing and
removing threaded fasteners in wood, metal and
plastic.
No other use permitted.
For professional use only.
DECLARATION OF NOISE AND
VIBRATION EMISSION
See page 45.
Vibration levels.
Sound levels.
: Vibration levels.
a , a
hd h
K / K = K = 3 dB : Uncertainty.
pA WA
L : Sound pressure level.
pA
L : Sound power level.
WA
All values are current as of the date of this
publication. For the latest information please visit
www.desouttertools.com.
These declared values were obtained by
laboratory type testing in accordance with the
stated standards and are suitable for comparison
with the declared values of other tools tested
in accordance with the same standards. These
declared values are not adequate for use in risk
assessments and values measured in individual
work places may be higher.
The actual exposure values and risk of harm
experienced by an individual user are unique
and depend upon the way the user works,
the workpiece and the workstation design, as
well upon the exposure time and the physical
condition of the user.
We, Desoutter, cannot be held liable for the
consequences of using the declared values,
instead of values reflecting the actual exposure,
in an individual risk assessment in a work place
situation over which we have no control.
12/2014
All manuals and user guides at all-guides.com
- 3 -
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration
can be found at http://www.pneurop.eu/uploads/
documents/pdf/PN3-02-NV_Declaration_info_
sheet_0111.pdf
We recommend a programme of health
surveillance to detect early symptoms which
may relate to noise or vibration exposure, so that
management procedures can be modified to help
prevent future impairment.
AIR LINE FILTER AND LUBRICATOR
It is necessary to get rid of moisture and dirt
from the air line and give proper lubrication. If
moisture, dirt and/or other impurities are put
in the tool, it may cause seize of the motor
part, unnecessary wear of parts and reduced
performance. Air filter and air lubricator are
mended to be fitted as close as practicable to the
tool in use.
LUBRICANTS
● Seek medical advice immediately if any
lubricant should contaminate the eyes or be
accidentally ingested.
● If air line lubricator is not used, lubricate
the motor part with ISOVG32 turbine oil or
equivalent oil daily before use. Do not burst
into full speed operation after lubrication, or it
may cause overspeed. Lithium system grease
is recommended for lubrication of bearings,
cam and clutch part, gears and gear cases.
Lubricate them when giving maintenance
or periodical inspection. Following are
recommended lubricants.
MOTOR PART
- Castrol Alphasyn T32
- Mobil SHC 624
- Texaco RD Lube 32
- Kuwait Petroleum Q8 Schumann ISO VG32
- Statoil Mereta 32
BEARING, GEAR, CLUTCH AND CAM
- BP Energrease LS-EP2
- Castrol Spheerol EP L2
- Esso Beacon 2
- Shell Alvania Grease EP2
- Mobil Mobilplex 47
- Texaco Multifak EP2
- Kuwait Petroleum Q8 Rembrandt EP
● When handling lubricants regularly, wear
suitable clothes of impervious material.
Clothing contaminated by lubricants should be
changed.
6159949610_04
Series: -