6159931420
Issue no : 16
Series : E
Original instructions.
© Copyright 2016, Ets Georges Renault
44818 St Herblain, FR
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.
STATEMENT OF USE
This product is designed for installing and
removing threaded fasteners in wood, metal and
plastic.
No other use permitted.
For professional use only.
ADVICE FOR YOUR SAFETY
● Please pay attention to the safety instructions
in the attached leaflet!
● Do not dispose of used battery packs in the
household refuse.
● Do not store the battery pack together with
metal objects (risk for short circuit).
● No metal part is to enter the battery section
of the charger (risk for short circuit).
● Never break battery packs and chargers
open. Only store them in dry rooms. Keep dry
at all times.
● Do not let any metal part reach the airing
slots (risk for short circuit).
DATA
See "Technical data", page 4.
Declaration of noise and vibration emission
● Noise level= 70 dB(A)
- A-weighted sound pressure level of the tool
according to EN 60745.
- Wear ear protectors!
● Vibration level< 2,5 m/s²
- Hand-arm vibration according to EN 60745.
All values are current as of the date of this
publication. For the latest information please visit
www.desouttertools.com.
These declared values were obtained by
laboratory type testing in accordance with the
stated standards and are suitable for comparison
with the declared values of other tools tested
in accordance with the same standards. These
declared values are not adequate for use in risk
assessments and values measured in individual
work places may be higher.
14 / 108
All manuals and user guides at all-guides.com
The actual exposure values and risk of harm
experienced by an individual user are unique
and depend upon the way the user works,
the workpiece and the workstation design, as
well upon the exposure time and the physical
condition of the user.
We, Desoutter, cannot be held liable for the
consequences of using the declared values,
instead of values reflecting the actual exposure,
in an individual risk assessment in a work place
situation over which we have no control.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration
can be found at http://www.pneurop.eu/uploads/
documents/pdf/PN3-02-NV_Declaration_info_
sheet_0111.pdf
We recommend a programme of health
surveillance to detect early symptoms which
may relate to noise or vibration exposure, so
that management procedures can be modified to
help prevent future impairment.
EXPLANATION OF SYMBOLS
● Read the instruction manual before
starting work or before operating
equipment or machinery.
CE mark
● Refer to the "Declaration of
Conformity" at the end of this
manual.
According to Directive 2012/19/EC
concerning Waste Electrical and
Electronic Equipment (WEEE), this
product must be recycled.
● Ensure that the marked item or its
material is part of a recovery or
recycling process.
● Do not dip into liquid.
● Could gas or explode.
● Do not heat up or burn.
11/2016