Power shutdown
To conserve battery power, the
camera automatically goes into a
sleep mode after 2 ½ minutes of
nonuse. Press one of the control
buttons, for example the shutter
button (1), to awaken the camera.
When the camera is not used for
an extended time, slide the
/
switch to
ON
OFF
12
.
OFF
LOADING THE FILM
You can load film into the camera
with the camera
NOTE: The battery must be loaded
into the camera for the film door
to open.
1. Push the film-door latch (16)
to open the film door (19).
or
.
ON
OFF