Troubleshooting - GreenWorks GBL80320 Manual Del Propietário

TROUBLESHOOTiNG

PROBLEM
Motor fails to start
when switch trigger
is depressed.
Unit will not start.
The unit will start,
but air will not flow
through the tube.
POSSIBLE CAUSE
Battery is not secure.
Battery is not charged.
Defective power switch.
Blocked tube.
SOLUTION
Ensure that the battery is fully secured in
the blower. Refer to installing the Battery
section in this manual.
Charge the battery pack according to the
instructions included with your model.
Have the power switch replaced by an
authorized service center.
Clear the blockage.
16