Dehydration Function - oneConcept 10030788 Manual Del Usario

Dehydration function

1. After the washing is completed, put down the drain, clean the water inside the barrel;
2. Place the dewatering basket on the pulsator and turn the dewatering basket
counterclockwise to snap into the groove of the pulsator.
3. Put the laundry in the dewatering basket and press it into the cover (to prevent
clothes from running out when it is dehydrated), cover the top cover, place the
program selector switch in the "dewatering" position, rotate the timer knob. Select the
dehydration time according to the type of clothing and begin to dehydrate. If the time
setting is too long, or halfway to stop, you can rotate the timer spin counterclockwise to
the "off" position, the dehydration basket will soon stop spinning.
Note: clothes should be evenly flat, and covered with a pressure cover, to avoid
the uneven placement of the machine caused by shaking.
4. To be dehydrated to the time (dehydration end), open the cover, remove the cover, and
take out the clothes to dry.
5. Turn the dewatering basket clockwise and pull it out of the dewatering basket.
Note: When washing, please remove the basket, washing method see the ma-
nual. The product of the dewatering basket can only be dehydrated to the clo-
thes without dripping, but can not dry the clothes.
10
Pressure
cover
Switch
dewatering
basket