MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left
door is lower
than the right
door.
1. If you open the drawer (
2. Insert the supplied Allen Wrench(3/16") (
3. Please adjust the height by turning the Allen Wrench(5mm) (
counter-clockwise(
when you turn the Allen Wrench(5mm) counter-clockwise(
1. After adjusting the doors, please insert the supplied fastener-ring (
gap between the hinge-grommet (
to insert depends on the gap.
Two fastener-rings are enclosed with the refrigerator.
Thickness of each fastener-ring is 0.04 inch.
Adjustment
part
), you can see the lower hinge (
1
) into the shaft (
3
).
2
3
4
1
) and the lower hinge(
7
When the left
door is higher
than the right
door.
Adjustment
part
).
2
) of the lower hinge.
4
) clockwise(
) or
3
), the door will move up.
) using a pair of pliers (
5
). The number of fastener-rings you'll need
8
3
) in the
6
Setting Up_15