CAME ZL37F Manual Del Usuario página 9

Connecting transformer
White
L1T L2T
PT
Adjusting closing-opening and deceleration speeds
To adjust speed speed of operation (gate run-speed), move the A
faston (the one with the black cable);
To adjust the deceleration speed move faston B (the one with the
red cable).
The data and information provided in this manual are to be considered susceptible to change at any time without warning, by CAME cancelli automatici s.p.a.
Black
Red
White = common
PT
Red = decelaration
Black = speed
Activating the radio command
1) Connect the antennae to the apposite terminals on the card.
2) Insert the AF card. The AF card MUST be inserted only when
the power is out, because the mother board will only detect it
when it is powered.
3) Memorise the coding on the base card in the following way:
- Keep the "PROG" button pressed
will flash).
- Press a transmitter button to send the code.
When the LED stays on, this means memorisation is finished.
c
b ( the signal LED
9