How To Order - Cequent Bulldog Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

No more than 20
To Couple:
1) Block trailer wheels.
2) Align hitch ball beneath coupler.
3) Set the locking pin in the open position.
4) Slide the locking plate into the open position and lower the
trailer onto the hitch ball.
5) Visually check that the hitch ball is fully seated in the coupler.
6) Slide the locking plate into the closed position.
7) Set the locking pin in the closed position to close the coupler.
To Uncouple:
1) Block trailer wheels.
2) Set the locking pin in the open position.
3) Slide the locking plate into the open position and
raise the trailer from the hitch ball.
Keep ball pocket and mechanism clean. The following procedures should be performed at least annually:
Check hardware torque
Grease ball pocket
Oil pivot points with SAE 30 wt. motor oil
Inspect retaining pin and replace if necessary
Use only Cequent Trailer Products parts. Replacement parts are available through Cequent Trailer Products Customer Service Department, 715-693-1700 or
800-604-9466. Please specify product model number.
Warranty. Cequent Trailer Products, Inc. ("We") warrants to the original consumer purchaser ("You") that the product will be free from defects in material
and workmanship for a period of three years under normal use and service, ordinary wear and tear excepted. If the product does not comply with this war-
ranty, We will replace the product without charge to You and within a reasonable time or, at Cequent's option, refund the purchase price. This warranty is
not transferable.
Limitations on the Warranty. The warranty does not cover the following: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a
result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation; (d) improper maintenance; (e) a product
altered in any manner by anyone other than us.
Obligations of Purchaser. To make a claim, contact us at 1050 Indianhead Drive, Mosinee, WI 54455, 1-800-604-9466, identify the product, and follow
the instructions that will be provided. Any returned product that is replaced or refunded becomes the property of Cequent. You will be responsible for ship-
ping costs to us. Please retain your purchase receipt to verify date of purchase. This must be produced to honor warranty claim.
Remedy Limits. Repair or replacement is the purchaser's sole remedy under this or any other warranty on the product, whether express or implied. We
shall not be liable for service or labor charges incurred in removing or replacing a product or any incidental or consequential damages of any kind. We ex-
pressly disclaim any implied warranty of merchantability or fitness for particular purpose after the three-year warranty period. Some states do not allow the
exclusion of incidental or consequential damages or limitation of an implied warranty so the above exclusion and limitation may not apply to you.
Legal Rights. This warranty gives you specific legal rights, and You also may have other rights which vary from state to state. ANY IMPLIED WAR-
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON ANY PRODUCT SHALL BE LIMITED TO THREE
YEARS FROM THE DATE OF RETAIL PURCHASE BY YOU. Some states do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to You.
This warranty is governed by the laws of the
United States of America and is void where prohibited.
Gusseting:
To support the coupler s rated load, reinforcements must extend down the
outer tube to within 3 above the bottom of the outer tube. The coupler
must be held rigid and vertical, and must not be damaged by heat during
installation.
Note: Reinforcement for non-adjustable couplers must be within 20 inches
above locking plates.
Non-adjustable coupler
Operation
Open
Locking
Plate
Locking Plate Open
Maintenance

How to Order

Limited Three Year War ranty
Reinforcement
No more than 3
Adjustable coupler
Closed
Open
Closed
Open
Hitch
Ball
1050 Indianhead Dr., P.O. Box 8 Mosinee, WI 54455-0008
800/604-9466
715/693-1700
Outer
Tube
Inner
Tube
Locking
Pin
Locking Pin
Housing
Closed
Locking Plate Closed
(Locking Pin Extends
Through Hole)
Cequent Trailer Products
Fax 715/693-1799
TR-Sales@cequentgroup.com
www.cequentgroup.com

Publicidad

Tabla de contenido
loading

Tabla de contenido