Singsation BRAVO SPKA75 Guia De Inicio Rapido página 3

Step 3: Plug in and charge
Before you start using the Singsation Bravo for the
first time, it's a good idea to charge it completely.
To charge the Bravo: Attach one end of the AC
adapter to the DC 10V jack on the left side of
the Singsation Bravo. Plug the other end of the
adapter into a working outlet or surge protector.
The charging indicator is red while the speaker is
charging. It turns green when it's fully charged.
Note: You can use the speaker while it's charging.
To charge faster, turn off lighting effects and the
light dome.
Step 4: Turn on
Press and hold the POWER/
PAIR
button on the front of the
Singsation Bravo (or on the remote)
to turn it on. The Bravo plays its
startup sound and the BLUETOOTH
indicator starts blinking slowly).
After 15–30 seconds, the Bravo
announces "Pairing" and goes to
Bluetooth pairing mode to set up
with your Bluetooth device. The
BLUETOOTH indicator starts blinking
faster.
Bravo, left
Charging
indicator
Bravo, front
3