Andersen Frenchwood 400 Serie Guia De Inicio Rapido página 2

Parts Included
(1) Instruction Guide
(1) Passive OR Active Lock Mechanism
(1) Inswing Blocker Assembly
(1) Outswing Blocker Assembly
Tools & Supplies
• Safety Glasses
• Hex Wrench for Handle Set Screw
• Phillips Screwdriver
• Flat Blade Screwdriver
• Torx Screwdriver
• Utility Knife
• Locking Pliers
• Hammer
This instruction guide includes instructions for replacing either the Active Panel Lock Mechanism or the Passive
Panel Lock Mechanisms. For Passive Panel Lock Mechanism Replacement proceed below. For Active Panel
Lock Mechanism Replacement go to Page 6.
Lock Mechanism Replacement - Passive Panel
1. Remove Trim Set
Support Handles and Escutcheon Plates when
removing bolts to avoid dropping/damaging hardware.
• Loosen Set Screw on underside of
Exterior Handle to remove Interior
and Exterior Handle.
• Remove Escutcheon Plate Bolts and
Interior Escutcheon Plate.
• Remove Exterior Escutcheon Plate
and Gasket.
Astragal
Active Panel
(Operating Panel
most commonly
used)
Exterior Handle
Set Screw
Hex Wrench
Gasket
2
Panel Identification
Passive Panel
(Operating Panel with
Astragal attached)
Exterior Escutcheon Plate
Escutcheon Plate Bolts
Active Panel
(Hinged or
Operating Panel)
Interior
Escutcheon
Plate
Interior Handle