BIG ASS FANS HAIKU Guia De Instalacion página 7

Install Airfoils
1
Remove and recycle the plastic protective cover.
Moving clockwise, align each airfoil on the fan hub and secure
it with the airfoil hardware (Fig. 1). Make sure the sticker color
on each airfoil matches the corresponding sticker color on
the fan hub!
Fig. 1
© 2020 BIG ASS FANS | ALL RIGHTS RESERVED
M5 Screw
Grommet
Airfoil
Install Lower Cover
2
Attach the lower cover. Make sure the wiring harness on the
bottom of the fan is tucked into the groove on the fan and the
groove on the lower cover (Fig. 2).
Fig. 2
Lower Cover
5