BIG ASS FANS HAIKU Guia De Instalacion página 8

Attach Extension Tube and Wiring Harness
3
Align the holes on the extension tube with the holes on the motor bracket, and then secure the tube with the M6 x 32 mm bolt and M6
nut (Fig. 3.1). Make sure the extension tube is not tilted and is perpendicular to the motor hub.
Connect the wiring harness from the extension tube to the receptacle from the motor hub (Fig. 3.2).
Fig. 3.1
M6 x 32 mm Bolt
6
Fig. 3.2
M6 Nut
Wiring
Harness
HAIKU® BY BIG ASS FANS | REV. D | 10/12/2020