Kohler K-12183 Guia De Instalacion página 6

Aerator
4. Installation Checkout
Connect the tailpiece and P-trap.
Make sure all connections are tight.
Remove the aerator by turning it counterclockwise.
Turn on the main water supply and check for leaks. Make any
adjustments as needed.
Turn the faucet handle to the cold side and open to the "ON"
position. Run cold water through spout for about a minute to
remove any debris.
With water still running, rotate the faucet handle to the "HOT"
side. Continue running water through the spout for about one
minute and then turn off.
Rinse any debris from the aerator and reinstall.
1011034-2-F 6 Kohler Co.