Chauvet DJ Kinta HP Guía De Referencia Rápida página 3

Power Linking
For the maximum number of Kinta HP products that you can power link at each voltage, see the User Manual or the
sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting clamp
(such as CLP-15 from
Chauvet)
Bracket Adjustment Knob
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
Menu Map
Refer to the Kinta HP product page on
Mode
Address
Automatic program
Program speed
Static color
Sound mode
Sound sensitivity
Infrared
Kinta HP QRG Rev. 1
QUICK REFERENCE GUIDE
Safety Notes.
www.chauvetdj.com
Programming Levels
3CH
d001–512
12CH
P-- auto
S-- 001–100
C-- C 1–15
Bo
SND
SLoW
SEnS 001–100
on
SEt
oFF
for the latest menu map.
Description
3-channel DMX mode
12-channel DMX mode
Automatic program
Program speed
Static colors
Blackout without sound
Slow without sound
Sound sensitivity
Turns infrared on or off
EN
Mounting bracket
Safety cable
(such as CH-05 from
Chauvet)
2