Onstar Level Adjustment; Vehicle Customization With Optional Lcd - Metra 99-3309B Instrucciones De Instalación

OnStar level adjustment

To adjust the OnStar volume level find the Black/Yellow wire on the 16-pin
harness. Push the blue OnStar button, while the voice is speaking tap the
Black/Yellow wire to ground. Once the volume is set it will stay at that volume
until the Black/Yellow wire is tapped to ground again. This can be set during
installation and then left alone. If user adjustment is desired, the customer may
also tap "Volume Up" or down on the steering wheel (if equipped) to adjust the
OnStar level.
Additional 12-pin harness (ASWC-1)
• This 12-pin harness is to be used in conjunction with the ASWC-1
(not included). Please refer to the ASWC-1 instructions for programming.
99-3309B
Vehicle customization
The OEM radio is used to customize certain features of the vehicle.
Use the optional LCD to adjust these features accordingly:
1. Press ESC, and then press ENT: "Set Language" will appear on the screen.
2. To change the language, press ENT, and then press the arrow up and down
buttons to change the language.
3. Once you have selected your language, press ESC to go back to the
main screen.
4. If you do not wish to change the language, you can scroll up and down through
the different settings with the arrow up and down buttons.
Note: What these options are depends on the vehicle/trim-level it is
installed into.
5. Remember to press ENT to change the desired setting.
6
with optional LCD
(AXXESS part # XIA-LCD sold separately)