Inserting/Replacing Batteries In The Remote Control; Risk Of Explosion; Setting Up The Device; Mains Connection - Medion LIFE P64007 Manual De Instrucciones

7. Inserting/replacing batteries in the remote
control
 Insert two 1.5 V R03/LR03/AAA/micro batteries in the remote control.
WARNING!

Risk of explosion!

Risk of explosion if battery is replaced incorrectly.
 Replace batteries only with the same or equivalent
type.
 Open the battery compartment cover.
 Insert the battery so that the negative pole contacts the springs. Refer to the il-
lustration in the battery compartment.
 Replace the battery compartment cover.
Replace the batteries if the device fails to react to commands from the remote con-
trol properly.

8. Setting up the device

 Place the device and speaker on a sturdy, level surface. Some aggressive varnish-
es can corrode the rubber feet on the device. If necessary, place the device on a
suitable underlay.
Before connecting an external device, unplug the mains plug from the
device!

8.1. Mains connection

Connect the mains power adapter.
 To do so, insert the round end into the DC
IN 15V 1.5A connection socket.
 Then plug the mains power adapter into
a properly installed 220–240 V ~ 50/60 Hz
earthed power socket that is always easy
to access.
62
5V 1A
15V 1.5A