How To Install The Wall Mount; How To Attach The Housing To The Wall Mount; About Cables And Cable Glands - Axis T93C10 Manual De Instrucciones

AXIS T93C10 Outdoor Housing

How to install the wall mount

CAUTION
Make sure that the screws and plugs are appropriate for the material (e.g. wood, metal,
drywall, stone) and that the material is strong enough to support the combined weight
of the camera, housing, and wall mount.
For dimension drawings, see www.axis.com.
1. Mark the holes for the wall mount on the wall and drill the holes.
2. Attach the wall mount to the wall.
3. Drill a hole in the wall for cables, under the wall mount.
1
Cable hole

How to attach the housing to the wall mount

1. Loosen the two screws on the wall mount.
2. Attach the housing with the attached knuckle to the wall mount.
3. Attach the two screws.

About cables and cable glands

All power and network cables must be routed through the cable glands.
NO NO TICE NO TICE TICE
To avoid moisture within the housing, the cable ports, wire feeds, and conduit must be fully
sealed. Make sure the following criteria is fulfilled:
12