WEBTEC HPM7000 Manual De Instrucciones página 121

IMPORTANT
Risk of property damage if the update process is stopped.
If the update process is stopped, the file system of the device could
be damaged.
► Before starting the update process, ensure that the battery is
charged to at least 50% or the device is connected to the main
power via the power adapter.
5 Tap on the button to start updating the firmware.
Ä The firmware on the device is updated. A progress bar indicates
the status of the updating process.
6 Wait until the process has finished.
Ä The device restarts several times during the process.
Ä When the process has been completed, the corresponding
message appears in the display.
Ä The latest version of the firmware is now installed on the device.
Troubleshooting
121