Switching The Device On And Off - WEBTEC HPM7000 Manual De Instrucciones

5.2

Switching the Device On and Off

Switching the Device On
1 When off, press the On/Off key.
Ä The device starts up.
After switching on, the firmware version and serial number are displayed.
Switching the Device Off
1 When switched on, press and hold the On/Off key for at least 5
seconds.
Ä The device is switched off.
Alternatively:
1 When switched on, press the On/Off key.
Ä The SHUT DOWN button appears in the display.
2 Press the SHUT DOWN button.
Ä The device is switched off.
Starting Up
33