2. Secure the auger as you disassemble the auger assembly
nut (Fig. 12).
Fig. 12
Auger
assembly
nut
3. Disassemble the left side cover by removing the five (5)
screws that hold it in place (Fig. 13).
Fig. 13
4. Remove the belt from the drive wheel (Fig. 14).
Fig. 14
5. Remove the screws and the bushings from the drive wheel
(Fig. 15).
Fig. 15
6. Remove the auger axle set (Fig. 16).
Fig. 16
7. Remove the old auger from the housing (Fig. 17).
Fig. 17
Drive
wheel
9
Screws and
bushings
Auger axle set
Auger