LEANDER Classic Guia Del Usuario página 4

USER GUIDE
IMPORTANT!
KEEP FOR FUTURE USE
EN: Congratulations on the purchase of your new
Leander cradle. The Leander cradle provides a
safe and comfortable environment for your baby.
The one-point suspension provides calm and
gliding movements, which stimulate your baby's
senses – as serene as life in the womb.
Assembling the cradle
Before use, brace the cradle with the supplied
white frame. Take out the mattress and turn
the cradle upside down. Place the frame on the
underside of the cradle and open out into a cross
(page 19, point 1).
Pull the fabric over the opened bar (point 2).
The 4 small sockets on the metal frame are now
visible. Insert one of the white frame ends into a
socket (point 3) and do the same with the diagonal
end. Repeat with the two remaining ends. Check
that they are all fully inserted. The frame is now in
place. Turn the cradle into the normal position and
carefully press on the base so the whole length
of the frame fit into the grooves.
Place the mattress in the cradle.
Important: The ceiling hook must be screwed
carefully into place in a bearing ceiling beam.
Secure the cradle and adjust the length of the
straps. The straps should be adjusted so that
the cradle hangs horizontally. The oval rings that
gather the straps must always be positioned as
far down as possible. Before the baby is placed
in the Leander cradle, an adult must ensure that
the ceiling hook can bear the weight. Carry out
a test by grabbing the upper part of the straps
and pulling hard. Perhaps test the strength by
WARNING
• The cradle should not be used
as a carry cot.
• The labelling on the inner side
of the cradle, 200 mm from the
edge, indicates maximum thick-
ness of the mattress/underlay.
• The ceiling hook must be se-
cured in a bearing ceiling beam.
• When a baby is able to sit,
kneel or to pull itself up, the
cradle shall not be used any-
more for this baby.
4 4
using your own weight.
If you have any doubts about this installation
guide, we recommend that you ask a
competent person for advice.
Dismantling of the cradle
Push the straps of the fixture upwards.
Loosen the square ring and pull the straps out of
the fixture. Pull the straps out of the buckles, the
oval rings and from the oval cradle frame.
Take the mattress out, loosen the base by undoing
the Velcro and take the base out. Turn the cradle
upside down and remove the white frame.
See page 19, point 4 for installation after
washing.
Cleaning and maintenance
The cradle bag is machine washable at max. 60
degrees without using bleaching agent. Do not
tumble-dry the cradle bag.
The mattress cover is machine washable at
max. 60 degrees without using bleaching agent.
Do not tumble-dry the mattress cover.
The wood can be wiped clean with a moist
cloth and surplus water is to be dried off.
The colour of the wood may change if
positioned in direct sunlight.
Product information
The lacquer used complies with the
standard EN71-3.
The Leander cradle complies with the
standard EN 1130:1996 part 1 and 2.
• The child's weight may not
exceed 10 kg when the cradle
is to be used.
• Toddlers should not play in the
vicinity of the cradle without
supervision.
• The cradle must never be put
in the vicinity of open fire and
other powerful heat sources,
e.g. electric heaters, gas
heaters, wood burning stoves,
fireplaces or the like.
• Be sure that all parts are cor-
rectly assembled so there is no
risk of body parts or clothing
(cords, necklaces, ribbons, etc.)
getting stuck with the risk of
strangulation.
• Do not use the cradle if there is
any sign of damage or defects.