HOW TO OPERATE
Now that your MARGARITA & SLUSH MAKER is pre-cleaned and
assembled, making perfect frozen drinks is both easy and fun!
1.
First, find a stable surface near an electrical outlet before starting. Make sure the
cord is away from any water source. Check the Power/Function Selection Buttons
panel and make sure unit is in the OFF position before plugging unit into outlet.
2.
Fill the Pitcher with your favorite liquor, drink mix or fruit. You may choose
to follow one of the recipes included in this Instruction Manual.
3.
Put the Pitcher Lid on the Pitcher and set the Pitcher in place.
4.
Set aside a dish of ice cubes and allow ice to sit for about 5-10 minutes, or
until ice has slightly melted and does not have a frosty appearance.
5.
Open the Ice Shaving Compartment by pushing the tab on the clear lid
inwards. Make sure the compartment is free of any foreign objects.
6.
Add enough ice cubes to reach, but not exceed, the MAX ICE line.
7.
Close the Ice Compartment lid. The Ice Compartment Lid should
close and snap shut with the lid fitting smoothly into place.
8.
To begin making your beverage, select and push the desired Power/Function
Selection Button located at the top of the MARGARITA & SLUSH MAKER.
Power/Function Selection Button options:
•
OFF - Red button that stops all blending and shaving.
•
Shave - Operates upper motor and shaves ice located in the Ice Shaving Compartment.
•
Blend: Operates lower motor and Blending Blade.
•
Shave Blend: Operates both upper and lower motors to simultaneously shave and blend.
9.
Allow ice to shave to desired consistency, then press the OFF button.
NOTE: This is not a commercial unit. DO NOT leave the unit
running for more than 3 minutes at a time.
10. Wait until all moving parts have stopped and the unit is unplugged
from the outlet before moving or cleaning the unit.
6