ION iAS01 Guia De Inicio Rapido página 7

Playing Audio from an External Device
To play audio from an external device (e.g., smartphone, computer, turntable, etc.):
1. If the unit is off, press the Power button to power it on.
2. Connect the 1/8" (3.5 mm) headphone output or RCA stereo output of your external
device to the Aux In or Line In input on the unit, respectively.
Important: The Aux In and Line In inputs are line-level. Your audio sources must be line-
level (no phono-level turntables).
3. Select Aux In or Line In as the media type by pressing the Source button on the unit or
the remote control.
4. To start playback, press Play on your external device.
Using the Radio
1. Attach the FM Antenna Cable to the Antenna input on the back of the unit.
2. If the unit is off, press the Power button to power it on.
3. Select Tuner as the source (described in
4. Press the Tun -/+ buttons on the remote control to travel through the FM band. You can
also press and hold the Previous and Next buttons to jump backward or forward through
the FM band to the next strongest station.
5. Press and release the Previous and Next buttons to change FM presets.
To add a station as a preset:
1. Use the Tun -/+ buttons to select the desired radio station.
2. Press the Mem button.
3. Use the Previous and Next buttons to select a preset number.
4. Press the Mem button again to save the station to that preset.
Selecting the Media Playback Mode).
7