Faucet Installation - Kohler Cabriole K-14616 Manual Del Usuario

Escutcheon
Apply Plumbers
Putty
Gasket
Spacer
For Three-Hole Lavatories

1. Faucet Installation

:
NOTE For single hole lavatories, the escutcheon, spacer and gasket are
not required. Use the rubber washer only.
For Three-Hole Lavatories:
- Installation to marble or plastic: Do not use plumbers putty.
Remove the backing from the gaskets and firmly press them over the
two outside lavatory holes.
- Installation to any other material: Place a bead of plumbers putty
around the underside of the escutcheon according to the putty
manufacturer's instruction.
- Position the spacer over the center lavatory hole with the gasket
surface down.
- Position the escutcheon over the three lavatory holes.
- Discard the washer supplied with the faucet.
For All Lavatories:
- Flush the water supply lines thoroughly to remove debris.
- Slide the washer (or escutcheon washer if escutcheon is used) over
the flexible hoses and mounting stud and into the groove in the
faucet body.
Kohler Co.
Lift Rod Hole
Connecting Nut
Mounting Stud
Washer (Replace
With Escutcheon
Washer If
Escutcheon Is
Used)
Hose
3
Hex
Wrench
B
1002277-2-