Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
18 Series Installation - Single Unit
Cartridge Installation
Back to back Installation
For back to back or reverse installations
(hot on right and cold on left): Rotate
cartridge (1) so the words "HOT SIDE" (2)
appear on the right. Install the cartridge
E.
1
Slide O-ring (1) over cartridge and the
bonnet nut (2). The O-ring, which acts as
a spacer to steady the sleeve, should rest
behind the bonnet nut.
2
Reverse
Installation
3
2
1
Cold
Hot
making sure that the key is fully engaged
with the slot in the brass body (see step D).
Slide bonnet nut (3) over the cartridge and
thread onto the body. Hand tighten securely.
F.
1
Slide the sleeve (1) over the cartridge,
body and O-ring. Ensure sleeve is properly
positioned over the front of cartridge.
10
Normal Installation
(changes not required)
Publicidad
Tabla de contenido
