General Setup; Frequently Asked Questions (Faq) - Mad Catz Cyborg F.L.Y. 9 Manual Del Usuario

Tabla de contenido

Publicidad

ENGLISH
Cyborg F.L.Y. 9 Wireless Flight Stick
Thank you for purchasing the Cyborg F.L.Y. 9 Wireless Flight Stick for use with the PlayStation 3 video game system. Be sure to register your product
online at www.madcatz.com and check out our full line of other quality video game accessories.
IMPORTANT! Before using the PlayStation 3 system with this product, read the PlayStation 3 system instruction manual for safety, health, and other
information regarding the use of the PlayStation 3 system.
All questions regarding the console should be directed to the manufacturer.

GENERAL SETUP

CONNECTING YOUR CONTROLLER TO YOUR PS3 SYSTEM
Up to four controllers, wired and wireless, can be actively connected to a PlayStation 3 console at one time. Each connected controller is assigned a
player indicator number. To connect a wireless controller, a player indicator number must be free (unlit).
1. Insert 2 (two) AA batteries into the battery compartment.
2. Insert the USB receiver into any available USB port on the PS3 – the receiver's Red LED will fl ash.
3. Power ON the Wireless Flight Stick – the 4 (four) controller port indicator LEDs located at the top of the Flight Stick will rapidly fl ash while the
Flight Stick is searching for a signal.
4. Once a connection has been established, the 4 (four) LEDs will fl ash less rapidly and the receiver's LED will turn solid.
5. Press the PS Button (located between Start and Select) on the Flight Stick. The PS3 will automatically assign a player number – from 1 (one) to 7 (seven).
6. The assigned player number will be indicated by the LEDs at the top of the Flight Stick:
a. Player 1 (one) – the LED above the # 1 (one) position will be lit.
b. Player 6 (six) – the LEDs above the # 2 (two) and # 4 (four) positions will be lit. Refer to your PS3's instruction manual for more information.
[2]
88931_MUG.indd 2-3
88931_MUG.indd 2-3
c1
A
B
C
SETTING UP YOUR WIRELESS FLIGHT STICK
A. Attach the Flight Stick handle to the base by inserting it into the base collar and tightening the securing screw.
B. Remove the adjustment tool from the compartment on the Flight Stick base.
C. Press the locking switch (c1) and move the Flight Stick up or down to adjust the height.
D. Insert the adjustment tool in the locking nut (d2) and turn counter-clockwise. Press the locking pin (d1) in and move the stick forward or backwards
to the required angle. Lock by turning locking nut (d2) clockwise.
E. Insert the adjustment tool into the locking nut (e1) and turn counter-clockwise. Move to the desired angle and lock by turning the locking nut clockwise.
f2
F
LAP-MOUNT OPTIONS
To make it easier to use your Flight Stick on your lap, we have added 4 (four) lap-mount brackets. To attach the brackets, turn the Flight Stick over.
Each bracket will display the letter L or R. The L brackets will attach onto the left side and the R brackets will attach onto the right side. To attach,
push the brackets into the securing holes (f1) and with all brackets in place, slide the lock catches (f2) into place.
CONFIGURING YOUR WIRELESS FLIGHT STICK FOR DIFFERENT GAME TITLES
Your Flight Stick has two modes which confi gure controls for specifi c fl ying games. You can switch between modes by sliding the switch on the right
side of the Flight Stick base to either mode M1 or M2. In mode M1, all controls will have the default labeled function - please see your game manual.
Mode M1 (Page 4) - Your Flight Stick buttons and controls are confi gured to play IL-2 Sturmovik, Tom Clancy: HAWX, or any future fl ight simulation games.
Mode M2 (Page 5) - Your Flight Stick buttons and controls are confi gured to play Blazing Angels 1 and 2.

FREQUENTLY ASKED QUESTIONS (FAQ)

QUESTION: When I have the Cyborg F.L.Y. 9 Flight Stick plugged into my PS3, I cannot navigate the XMB (XrossMediaBar) menu correctly.
ANSWER: Ensure the throttle is set to the "0" (neutral) position. If the throttle is engaged all the way up or down, you may experience the XMB menu
moving unexpectedly. When the Flight Stick is in mode 2, the throttle emulates the analog stick on a standard gaming controller used to navigate the
XMB menu.
QUESTION: My Flight Stick is not functioning at all. The LEDs surrounding the PS button are fl ashing, but there is no response in the XMB menu or game.
ANSWER 1
Ensure fresh batteries are in the Flight Stick. If the battery level is too low, you may experience loss of connection to the USB dongle and console.
:
ANSWER 2: Pair again (synchronize) the USB dongle with the Flight Stick:
1.
Insert USB dongle into PS3 console.
2.
Power ON Flight Stick by pushing PS button.
3.
Simultaneously hold down both the PS button and the L3 (left stick button) for 5-10 seconds.
4.
If successfully paired, the player indicator LEDs surrounding the PS button will no longer fl ash, and one of those LEDs will stay lit.
d1
e1
d2
D
E
f1
[3]
10-8-3
10-8-3
2:04
2:04

Publicidad

Tabla de contenido
loading

Tabla de contenido