Sunny Health & Fitness SF-RW5856 Manual Del Usuario página 10

We value your experience using Sunny Health and Fitness products. For assistance with parts
or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
#74
D8* ¦ µ 1 6*1.5
#70 M8*15 4PCS
70
#72 M8*102 1PC
#24 Φ16*94*M16 1PC
1
78
74
41
41
42
40
1
4PCS
89
S6
3
74
74
70
5
#78 M8*H7.5*S13 1PC
#54 8 *100*105 1PC
¦ µ
#74 D8*Φ16*1.5 2PCS
24
24
74
72
54
3
42
STEP 3:
Insert the Seat (No. 32) into the Sliding
Rail (No. 3).
Attach the Sliding Rail (No. 3) onto the
Rear Support (No. 5) using 4 Screws (No.
32
70) and 4 Flat Washers (No. 74). Tighten
and secure with Allen Wrench (No. 89).
STEP 4:
89
S6
S13
S19
90
Connect Trunk Wire (No. 41) with the
Sensor Wire (No. 42).
54
Attach the Sliding Rail (No. 3) to Main
Frame (No. 1) using 1 Bolt (No. 72), 2
Flat Washers (No.
(No.
Spanner (No. 90) and Allen Wrench (No.
89).
Next, attach the top of the Sliding Rail
(No. 3) to the Main Frame (No. 1). Insert
the Pull Pin (No. 54), then use Knob (No.
24) to tighten.
STEP 5:
Take out 2 AAA batteries from the plastic
bag with the manual. Push Computer (No.
40) upward, then remove Computer (No.
40) from Main Frame (No. 1). Disconnect
Trunk Wire (No. 41) and the link wire of
Computer (No. 40). Install the 2 AAA
batteries into the back of Computer (No.
40).
9
74), and 1 Nylon Nut
78). Tighten and secure with