Rollei Lumen Stick Manual De Instrucciones página 5

Overview
1
1 1/4" tripod thread
2 Battery compartment
3
Display
4 1/4" tripod thread
5 DMX input / output
Power supply
• Use with mains adapter: Please plug the supplied mains
adapter into the mains connection. Slide the on/off switch to
"Input DC" to switch on the LED light.
• Use with rechargeable batteries: Insert the supplied batteries
into the battery compartment and slide the on/off switch to
"Battery" to turn on the LED light.
• Note: Please charge the batteries completely before using them
for the first time. Always use the original charger to charge the
batteries.
CCT – Color Temperature Mode
A
CCT Mode
CCT:4500K
GN: 0
BRI: 0%
B
Adjust color temperature and brightness:
• After switching on, move the slider to "CCT".
• Turn knob (A) left or right to increase or decrease the Kelvin
value.
• The color temperature can be set between 3200K and 9999K in
hundred increments.
• Press the control knob (A) to increase the green portion of the
selected color temperature.
• The menu item "GN" is highlighted in the display and the green
component can be adjusted to the light situation by turning the
control knob (A).
• The brightness can be adjusted between 0% and 100% with
the adjustment knob (B) (steps: 20%, 21%, 22%, 23%, 24%,
25%, ...).
2
10 9
ENGLISH
8
6 Setting knob (A) and (B)
7 HUE (color space) and CCT (color temperature)
8
On/off switch
9 1/4" tripod thread
10 Mains connection
Rollei Lumen APP
Download the "Rollei Lumen" app directly
from the App or Google Play Store (IOS 9.0 or
higher, An-droid 5.0 or higher).
1. The "Rollei Lumen" app adapted for the
Lumen Stick allows you to make better use
of the various functions of the LED light.
2. Please take the latest version of the app as your default. Subject
to change without notice.
Save Color Features and Brightness:
• You have the possibility to save up to 8 different color profiles.
• Select your desired color temperature and brightness.
• Then press the setting knob (B) and select the "Preset Temp"
menu by turning the setting knob (B). Press the control knob (B)
again to select the function.
• Now turn the control knob (A) to select the different memory
locations.
• To save the set color temperature and brightness, press the
control knob (A) once.
• To recall the saved settings, press the adjustment knob (B),
select the "Preset Temp" menu and select the memory location
with the adjustment knob (A).
3 4
7 6 5
5