Rollei Lumen Stick Manual De Instrucciones página 6

6
Picture modes
Instead of manually setting the color temperature of the LED
lights, you can also use different scene modes. These are preset
lighting situations.
Press the control knob (B) and select the "Light Source" menu by
turning the control knob (B). Press the control knob (B) again to
select the function.
Turn the control knob (B) to select a scene mode.
12: Fluorescent soft white 3200K
13: Fluorescent Warm White 3600K
14: Fluorescent White 4300K
15: Fluorescent daylight 5000K
16: Camera flash 5500K
17: Fluorescent daylight 6700K
18: Daylight cloudy 7300K
19: Daylight Shadow 8400K
20: Daylight Snow 9500K
Color, Saturation and Intensity
Save color, saturation and intensity:
You have the possibility to save up to 8 different color profiles.
• Select your desired color, saturation and intensity.
• Then press the control knob (B) and select the "Preset Colors"
menu by turning the control knob (B). Press the control knob
(B) again to select the "Preset Colors" menu
• Turn the control knob (A) to select the different memory
locations.
• To save the set color, saturation, and intensity, press the control
knob (A) once.
• To recall the saved presets, press the control knob (B), select
the "Preset Colors" menu, and select the preset location with
the control knob (A). To exit the "Preset Colors" menu, press
the control knob (B).
ENGLISH
HUE – RGB mode
A
B
• Turn on the unit and move the slider to "HUE".
• Turn the control knob (A) left or right to change between 360
colors.
• Press the control knob (A) to adjust the saturation of the color.
The menu item "Sat" is highlighted in the display.
• Turn the control knob (A) clockwise to increase saturation and
counterclockwise to decrease saturation.
• Turn the control knob (B) clockwise to increase the intensity and
counterclockwise to decrease the intensity.
Color effects and styles
You can use the Lumen Stick to recall various preset styles and
color effects.
• Press the control knob (B) and rotate the control knob (B) to
select the „Cycle Effects" menu. Press the control knob (B) again
to select the function.
• Now select a color effect or style by turning the control knob
(B).
– Transitions: 37– 47, 83
– Stroboscope: 48–55, 84 – 86
– Pulsating: 58 –59, 81– 82, 87
– Party Lights: 103
– Police car: 104
– TV light: 105
– Flash: 106
To increase or decrease the speed of the effect, turn the control
knob (A) until „Speed" is highlighted. Turn knob (B) to adjust the
speed - 1 is the slowest speed and 32 is the fastest.